Sunday, July 31, 2016

Ork Train Apocalypse Battle at Warhammer, The Summit store

Hi everyone,

Had the chance to play the Waaaghbash Kannonball Ork Train in an Apocalypse Battle yesterday at the Warhammer, The Summit store.  Here is a link to the Store's page with a video of the train in action.

The Waaaghbash Kannonball lining up against seven armies in Da Chew Chew A PoK O'LiPZ battle at the Warhammer, The Summit Store

It was great fun!  Here are several highlights!
  •  First of all, a big thanks to the Warhammer, The Summit store team and all of our opponents.  We have been wanting to have an Ork Train battle for a long time!
  • There were SEVEN fantastic opononents challenged the Supreme Warbosses Fork and Spork and their Looted Ork Train!  (All at the same time!  What a table full of fire-power!)
    • 1 Space Marine Army
    • 2 Necron Armies
    • 1 Eldar Army
    • 2 Tau Armies
    • 1 Chaos Army
  •  Stayed up until 3am the night before finishing up painting on Da Pain Train and also on the Kannon Kar.  But, had both ready for battle :)
  •  Since each army had quite a few points, played as if each car of the Ork Train was a Stompa.  And, added a Kustom Force Field for staying power (from the Plasma Ball on the Kannon Kar).
  • Each army made hits on the train.  Interestingly the most focus was put on the Grot Tank Holda (flat car with Grot Tanks).  It died first :(
  • We also played a rule that each Ork Train turn, the train drove for a random number of seconds -- and then dropped of 3D6 Orks to charge!  That was fun because it gave some of our co-generals a chance to play their orks as well. 
  • To keep things balanced, and also in deference to our opponents, created an informal rule that the train (and 7 huge Stompa guns) would target the enemy armies evenly.  And, while this did help with balance, it meant that Eldar army's Heavy Wraithcannons were still around.
We have quite a bit of posting to catch up on.  Getting the train ready has taken nearly all free moments in the past 2 weeks.  So, posts we'll have coming....
  1. Update on Da Pain Train
  2. Update on the Kannon Kar
  3. Update on the Kaboose and Train Boyz
  4. Update on Flat cars (Grot Tank car and Stolen Space Marines' Container car 
  5. More fluff.  We have been working on the back story of Spork, Fork and the Waaaghbash Kannonball :) 
Da Pain Train passing a line-up of Tau!

The Dakka Chugga leading the way....

Figuring out the rules as we get started....  Space Marines and two armies of Necrons at this end of the table.

The Grot Tank Holda passing the Eldar.  (OW!  DOZE D WEPPONZ HURTZ!)

The Kannon Kar passing between the Eldar and Tau....

The Waaaghbash Kannonball steaming past two Tau armies....

 Armies on the move!  The first Ork turn is over, the seven armies close in!

And, we're thinking of having another battle in the fall.  Will be a chance to update the rules a bit.  Also might be a very good idea to plan on more co-generals to make things faster on our side :)

Please help us with any thoughts on the next battle.  Some ideas already in the works....
  1. More or different cars for the train (Fork and Spork's Meks have some SEKRET PLANZ)
  2. Making each car have unique rules?  Or, maybe Big Mek Stompas instead of vanilla Stompas?
  3. Maybe one army (randomly drawn card) decides to target the other armies so that they can capture whatever is inside the Space Marine container (an Artifact!) and have it for themselves.  In the first turn, which army would you present your back to?  Should the Orks still shoot if one army is on their side?  (Well, they probably should....)
 And, for handy reference, here are links to our earlier postings about the Ork Train:

Sunday, July 10, 2016

Kannon Kar - (Pink Orks' Mek contributes to the Waaaghbash Kannonball)

Hi everyone,

Supreme Warboss Spork has been ENKOR-RAGIN' his Pink Ork army's Meks to come up with some BIGGER DAKKA for the battle he can feel coming.  He has agreed to an alliance with his brother Fork and his yellow Orks - and together they are readying the Waaaghbash Kannonball, their Ork Looted Train!

Waaaghbash Kannonball; Ork Looted Train; Dakka Chugga; Spork; Fork
 The Ork's Waaaghbash Kannonball!

What's been on Spork's mind is that a really, really big gun mounted as part of the train has very clearly been used in the history of FIGHT'IN!!  Spork's Weird-boy has pulled the following images from the Warp for study:

Believe this train mounted gun was built by the French army.  Though pretty sure there are examples of this built by many armies over time....

An even earlier example of a train mounted cannon!

Catching you up, here are several posts related to the Waaaghbash Kannonball:
- The grand plan for the full looted train, Waaaghbash Kannonball
- The Dakka Chugga, looted steam train (POWER'D BY BURNIN' NIDZ!)
- Da Pain Train, looted from Eldar hardware
[This, here is the post about the Kannon Kar]
[And, still have work to do on the Kaboose Observ-obliteration Kar]

Spork's team has the following ideas for the Kannon Kar:
  • Should have a really big gun.  After looking around, found a very nice big Tyranid "arm" gun.  Figured this could be looted with some way to mount it.
  • Fully functioning turret; fully functioning elevation.  We weren't sure how to do this.  But, Spork has learned the hard way that if guns can't aim (with the help of Grots), they are pretty limited in what they can shoot.
  • Had the idea of using a "Plasma Ball" on the Kannon Kar.  Got this idea from a very nice posting on Dakka Dakka where a visionary Warboss and Mek had mounted one onto a Morkanaut (here's a link to Deathwhisper's post)
And, for the beginning, that was it.  Then, had a nice visit with the team at Reno's The Summit Warhammer store.  (Happened to be on the Space Marine's Birthday.)  Chatted with them about the idea of playing a Death Race type scenario (which, of course, being a fight or battle, Fork and Spork agreed to)....  And, they pointed out that it would be pretty cool if the Kannon Kar's assemblage could disconnect from the flat car and charge into the battlefield if/when necessary.  Have had this idea echoed by several others in the past few weeks, so figured we needed to find a way to do it.
  • Mount gun on mobile platform.  Well, a Rhino turned out to be pretty easy for Spork's boyz to obtain....  [And, disclaimer -- one of us -- who also works hard on his Space Marine Army pointed out that Ork looting was a pretty darned poor use of the Emperor's valuable Rhino!!!]
  • Create a locking turret.  More tricky.  Lacking detailed plastic - and not wanting to use HUGE magnets, decided on using a threaded turret assembly.  Probably crazy to watch in real life - if the tank body is rotated enough times (righty-tighty; lefty-loosey), it comes free and can drive off the flat car.
As a bonus, the use of a Rhino provides a location to mount the 12V battery needed for the plasma ball's battery :)

Our Basic Raw Materials....

Here are the flat car (which once upon a time launched Lionel Train rockets with a little spring - ours doesn't - we got this off eBay for lower $$); the Rhino; and the Tyranid "arm" for the Nid Gun....

Kannon Kar; Tyranid Gun; Nid Gun; Ork Looted Tyranids
Caption....

Turret Assembly:

Looking around, we stumbled on the safety lid for medicine bottles.  We could cut the top off the bottle and then use the lid (which had threads on it) to mount on the flat car - and thread the tank onto that.

Here's the medicine bottle we looted to form our turret.  Cut off the top of the green plastic from the pill bottle - glued this to the bottom of the Rhino.  Then, mounting the lid onto the flat car.

So, here is the flat car with the lid glued on.  We had to build some I-beam structure under the lid to make sure that the Nid Gun wouldn't hit the brake superstructure on the flat car.  Added some bits for the rotation's automation.

Here's our flat car so far.  Have the rotation hardware in the works.  Needs some Seth Wires and Pipes to be added yet.

The Kannon -- Nid Gun

We cut off the "shoulder" connection part of the big tyranid arm -- and then had the idea to glue that onto an Ork Gun.  We connected the two with some "Seth Wires" (link to our lesson from Seth at Game Kastle - use real things for real things....)





Here is the tyranid gun-arm glued onto the Ork gun....

Very fine Seth Wires on this side - connecting the Ork power supply to the little "holes" in the tyranid arm up above....

One bit Seth Wire on this side to connect the Ork power to the Tyranid section....  (We added some other Ork bitz for fun!)


What was cool about that is that the Ork gun was set up to mount in a Lobba set of brackets for elevation.  Of course, we didn't have an extra Lobba bracket-set.  So, we dug through our bits.  And, what do you know - the forks of a Warbike (if turned inside-out) fit right onto the little plastic buttons on the Ork gun.  So, we used some hunks of sprue to build up an assembly to allow for the elevation.

Here is our gun hinge formed out of Warbiker forks with a couple of pieces of sprue glued on.  Probably going to add an Ork or Grot to be the elevation operator - but haven't done that yet.

Even more cool, that set of Warbiker forks fits right into the front of the Rhino!

Nid Gun; Battlegaming One; Kannon Kar; Looted Tank; Looted Tyranids
Here is the 'Nid Gun on the front of the Looted Rhino.  You can see the inverted forks fitting perfectly into the front of the Rhino!

The Plasma Balla and Power Supply

We had sent a message on DakkaDakka to Deathwhisper to inquire about the plasma ball they had used on their Morkanaut.  Feedback was to look at Amazon, searching on Thunderball Plasma Pendant.  It's only about 2" across - so perfect to use.  (Here's a link - though probably need to find a different way to buy right now - this one says it's not in stock.) 

The Thunderball comes with a 12V car's cigarette plug - and a string of 12V hearing-air type button cells wired up.  Deathwhisper had warned us that the wiring (including the fuse in the plug) were a bit finicky - so we were ready for trouble.

Main thing was that we wanted ours to be rechargeable - and didn't intend to use in a car.  So, we cut away the alkaline batteries and the car plug.

Then, searching on eBay we found a very small 12V lithium ion battery which came with a charger.  (It took some searching to find one small enough to fit inside the middle of a looted Rhino!)

We wired this up to the 12V input to the Plasma Ball's boost converter - and Wow! we were in business.

Looted KFF; Kustom Force Field; Kannon Kar
Here is our rewiring job in completed state.  Lithium ion battery pack spliced to input of boost converter for Plasma Ball.

Quick video so that you can watch the plasma ball working - this was plugged into the car....

Another video of the plasma ball working from our 12V batteries

So, that's where things stand.  Lots of work yet to do -- here's a list.  And, of course, open to new ideas....
  • Air brush the tyranid gun arm the same colors we used for the tyranid bodies in the Dakka Chugga's tender (blue and turquoise)
  • Add more Orky bitz to the Rhino
  • Build a "holder" for the plasma ball -- probably will use more tyranid bits for this
  • Add Seth Wires to connect the plasma ball to more parts of the tank
  • Mount things together with magnets (figure we need to use magnets in case we ever need to update the wiring)
  • Mount the recharging cable in a way which looks cool - not dangling behind the Kannon Kar!
  • We'll probably have room on the flat car for some Ork boyz -- we'll see...
Kannon Kar; Ork Kannon; Ork Looted Tank; Plasma Ball; Ork KFF
Here is the Kannon Kar so far - with Plasma Ball flaring away!

Thursday, July 7, 2016

Creating custom dice rolling tray!

Hi everyone,

Battlegaming One; Custom Dice Tray; RPG Dice Tray; Building a Dice Tray
We rebuilt the Farkel dice game tray into a custom-color RPG dice tray!

Over the past few months, playing some Pathfinder home campaign sessions, we've come to really want to have one of those cool dice rolling trays.  (How else can someone be sitting comfortably on the couch and still have a nice way to roll their dice!)

With that goal in mind, we stumbled across a game at a thrift store - and starting thinking about whether or not we could make a conversion....  From the "Farkel Game Set" (which doesn't really fit with the aesthetic of RPGs) to a cool looking dice tray....

We'll outline what we came up with below.  Bottom line is that it turned out pretty well :)

Step 1:  Found the Farkel Game Set -- $1.50.  Got us the plastic pieces we needed -- and even several dice for the collection.

Rebuilding games; Rebuilding Farkel; Using parts from thrift store
Here's a look at our $1.50 Farkel Game Set box.  Came with what you see here....  We didn't really like having all of that Farkel came business on our tray.  (Though it certainly would have worked!)


Step 2:  We pried the back plastic off of the rim plastic.  Turned out it was only glued at eight places (on the points of the octogon).  We found that 3-4 of these were pretty weak.  Once we had them loose, we pried the rest apart.

Here's how things looked once we pried everything apart.  We were able to get the rim plastic off of the back plastic.

Step 3:  We pried the red Farkel felt off of the back plastic piece.  It wasn't too hard to pull off.  Seemed like something kind of like wood glue or Elmer's glue which was holding it on there. 

The nice thing about the back piece is that it has black felt on the rear surface.  This helps it sit nicely on a table-top.  We left this alone :)

Here's how things looked with the felt removed -- and the two plastic pieces separated.

Step 4:  Size the new felt.  It turned out that there was an "inner lip" on the back plastic piece.  This was great because it meant that we only needed to size our new felt piece to go over that lip.  And, we didn't need to be very exact about it.  Then, the rim plastic bites on that lip -- but is glued to the outer edge of the back plastic.

[Where to get felt?  We got ours at Jo-Ann's Fabrics.  Suspect you can buy sections of felt - in pieces or by the yard in any fabrics store.]

We roughly cut the felt -- and then were ready to trace the imprint of that inner lip.

Here are the parts with our rough-cut felt piece.

Step 5:  Cutting to the outline.  We used our little clamps to hold the felt tightly to the back plastic.  Then, we traced that inner lip edge.  This gave us something to cut to.  So, we removed the clamps and cut with scissors.

Here's how things looked prior to cutting.  You can see the pattern we needed to cut to.  Nice and easy.

Step 6:  Test fit up.  We put all of the pieces together and had a look.  Things did fit!  We were a little bit worried because our felt was certainly thicker and more substantial than the red Farkel felt.  But, all was good.  We could press the rim piece down to where it previously bonded to the back piece.

And, we liked the colors.  The turquoise with the black rim.  We chatted a bit about what to do next.  Should we keep the colors the same (same black) -- or perhaps air brush the rim plastic another color.  In the end, we decided to stay with the high contrast black.  But, we wanted to end up with a mat finish -- and paint over the "made in...." marking.

Here is the test fit-up.  The turquoise with black looks good - and pieces fit together even with our thicker felt.

Step 7:  Paint and glue.  We used our black primer spray-paint to paint the rim piece -- and we didn't worry about the back piece.  Once this was done, we used super glue to glue the two pieces back together.

Here is our finished dice tray!

Here's how the tray ended up!  We had to re-glue a little bit of the back felt - but otherwise very solid.  We've been using it now for a month - and mission accomplished - works well on the couch!!  (By the way, as we're sure everyone who uses these knows -- it works well on a table as well!)

All finished - here's a test....  Not so surprising - it works :)